COOLWELL best sellers

#1 🔥 WM8960 Audio Module Hi Fi Coolwell WM8960 Audio Module Hi-Fi Sound Card HAT for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W Stereo CODEC Play/Record

£18.80 on Amazon

#2 Audio Expansion Module COOLWELL Audio Expansion Module For Raspberry Pi Pico, Headphone And Speaker Signal Output At The Same Time, Wide Range Audio Sampling Rate

£17.50 on Amazon

#3 PCIe TO 4 Ch SATA 3.0 COOLWELL PCIe TO 4-Ch SATA 3.0 Expander Supports Compute Module 4 (CM4), 4 CH SATA 3.0 Interface, 6Gpbs High-Speed

£23.90 on Amazon

#4 Power over Ethernet HAT COOLWELL Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B,802.3af Compliant Power Over Ethernet Accessory Power Sourcing Equipments Needed

£25.95 on Amazon

#5 Waveshare 2 Channel Isolated Coolwell Waveshare 2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi Series Boards MCP2515 + SN65HVD230 Dual Chips Solution Multi Allows 2-CH CAN Communication

£24.95 on Amazon

#6 Dedicated Aluminum Heatsink COOLWELL Dedicated Aluminum Heatsink For Raspberry Pi Compute Module 4 CM4, Notched For Antenna, Corrosion/Oxidation Resisting

£7.35 on Amazon

#7 PCIe TO USB 3.2 Gen1 COOLWELL PCIe TO USB 3.2 Gen1 Adapter Designed For Raspberry Pi Compute Module 4 IO Board(CM4), 4x High Speed USB Ports,Compatible with USB 3.0/2.0/1.1

£19.50 on Amazon

#8 2 CH UART To Ethernet COOLWELL 2-CH UART To Ethernet Converter Module, Bi-direction Serial Port Transparent Transmission between UART TTL and RJ45,802.3-compliant

£15.50 on Amazon

#9 UPS HAT (C) For Raspberry COOLWELL UPS HAT (C) For Raspberry Pi Zero Series, Stable 5V Uninterruptible Power Supply, Multi Battery Protection Circuits Real Time Monitoring

£24.20 on Amazon

#10 SIM868 GSM/GPRS/GNSS COOLWELL SIM868 GSM/GPRS/GNSS Module For Raspberry Pi Pico, Supports 2G Communication, Phone Call, SMS,GNSS Positioning, Bluetooth Connection

£32.65 on Amazon

#11 Waveshare Raspberry Pi Coolwell Waveshare Raspberry Pi 400 GPIO Header Adapter, Header Expansion HAT Module

£7.95 on Amazon

#12 USB 3.2 Gen1 HUB HAT COOLWELL USB 3.2 Gen1 HUB HAT For Raspberry Pi with 4x USB 3.2 Gen1 Ports, Driver-Free compatible with USB 3.0/2.0/1.1

£21.50 on Amazon

#13 Solar Power Manager (C) COOLWELL Solar Power Manager (C), Compatible with 6V~24V solar panels, Supports 3x 18650 Batteries(Not include), Supports MPPT Function

£26.80 on Amazon

#14 Waveshare Precision RTC Coolwell Waveshare Precision RTC Module For Raspberry Pi Pico Series, Onboard DS3231 Chip with Female Pin Header Stackable Design

£13.50 on Amazon

#15 Waveshare Stepper Motor Coolwell Waveshare Stepper Motor HAT for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH Jetson Nano Dual DRV8825 Motor Controller up to 1/32 Microstepping Drives Two Stepper Motors

£28.90 on Amazon

#16 For Raspberry Pi 5 Power Coolwell For Raspberry Pi 5 Power Over Ethernet HAT (F) High Power with Cooling Fan Supports 802.3af/At Network Standard with Heatsink

£27.83 on Amazon

#17 For Raspberry Pi 5 Power Coolwell For Raspberry Pi 5 Power Supply 27W USB-C PD Power Supply Output 5.1V/5A, 9V/3A, 12V/2.25A, 15V/1.8A ETL Listed-GaN PD 5A 27W

£12.90 on Amazon

#18 Solar Power Manager Module Coolwell Solar Power Manager Module (D) Fits Raspberry Pi/Jetson Nano/Arduino Supports Type-C Power Adapter or 6 V ~ 24 V Solar Panel with Battery Holder (Not include 18650)

£18.25 on Amazon

#19 BME688 Sensor I2C BME688 COOLWELL BME688 Sensor I2C BME688 Environmental Module for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W / Pico/Arduino /ESP32 Supports Temperature Humidity Barometric Pressure Gas Detection With AI Function

£26.95 on Amazon

#20 BME680 Sensor I2C BME680 COOLWELL BME680 Sensor I2C BME680 Environmental Module for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W / Raspberry Pi Pico/Ardui /ESP32 ...Supports Temperature Humidity Barometric Pressure Gas Detection

£16.31 on Amazon